Mahindra 16 Series Features

[Andy]

Register to stop seeing this ad!

Standard Features

• Easy-to-read gauges on any lighting or any time of day
• Heavy and sturdy 3-point hitch for maximum stability
• Infinite speed automatic transmission for all HST models
• Mid power-take-off (PTO) available for all models, offered standard on selected HST models
• Tiltable steering column except for the 1816
• Hitch lowering speed adjustment knob
• Easy hook for top link retention
• Easy access hydraulic block to enable external hydraulic connections
• Foldable Roll Over Protection Status or ROPS
• Comfortable, adjustable driver seat with water drain facility
• Spacious, full-flat operator platform on selected models
• Easy forward tilt possible on seat for tractor storage
• Front bumper / weight bracket
• Enclosed down-swept exhaust muffler
• Hood opens completely for ease of access
• Reinforced metal fenders. Additional sleek plastic mudguards on 3316
• Drawbar
• Spacious, full-flat operator platform with rubber mat on 1816, 2516, 3316
• Clear view, multi-functional instrument panel
• Ergonomic controls and pedals for operator comfort
• Comortable mounting step and easy grip handle on both sides of the tractors
• Handy toolbox behind driver on selected models
• Easy latch for clutch pedal locking during tractor storage
• Best in class 5-year limited warranty (starting October 1, 2009)

1816 HST | 2216 4WD/HST | 2816 4WD/HST | 3316 4WD/HST
Loader – ML102 | ML104 | ML106 | ML111
Maximum Lift Height (inches) – 74 | 76.5 | 96.5 | 94
Clearance with Attachment Dumped (inches) – 58.8 | 57 | 79 | 76
Reach at Maximum Height (inches) – 25 | 22.4 | 28 | 24.5
Maximum Dump Angle – 38˚ | 45˚ | 39˚ | 38˚
Attachment Rollback Angle – 20˚ | 20˚ | 19˚ | 20˚
Digging Depth below Grade (inches) – 4 | 5.8 | 2.9 | 4.8
Lift Capacity to Full Height @ Pivot Pins (lbs.) – 900 | 915 | 1050 | 1410
Breakout Force @ Pivot Pins (lbs.) – 2000 | 1828 | 2172 | 2650
Rated Flow of Tractor System (gpm) – 4.5 | 5.8 | 7.8 | 7.4
Attachment Width used for specification (inches) – 48 | 48 | 60 | 60
Attachment Rated Capacity used for specification (cu.ft.) – 5.3 | 5.8 | 9.0 | 9.0
Cycle Times @ rpm – 2800 | 2900 | 2900 | 2700
Raise Boom (seconds) – 4.3 | 3.1 | 2.8 | 4.9
Lower Boom (seconds) – 3.5 | 2.2 | 2.2 | 4.1
Dump Attachment (seconds) – 2.8 | 2.1 | 1.9 | 3.8
Retract Attachment (seconds) – 2.5 | 2.1 | 1.9 | 3.0
Optional Attachments – Grille guard | Grille guard, Quick Attach Adapter – Pin-On, Pallet Fork | Grille guard, Quick Attach Adapter – Pin-On, Pallet Fork | Grille guard, Quick Attach Adapter – Pin-On, Pallet Fork, Bale Spear
Skid Steer Attachments – n/a | n/a | n/a | Bucket, Quick Attach Adapter, Bale Spear, Pallet Fork


1816 HST
L3E Engine
Type – Four stroke, indirect injection, water-cooled, diesel
Cylinders – 3
Engine – 18 HP (13.4 kW) @ 2600 rpm
Compression Ratio – 23:1
Displacement – 58.1 cu. in. (952 cc)

Open-center, full-live hydraulic pump with position control
Pump Output – 4.5 gpm
3-Point Linkage – Category 1, with check chains
Lift Capacity – 1400 lbs.
Rear Auxiliary Remote Valves – 1 spool optional


Live PTO
PTO RPM (engine rpm) – 540 @ 2376
MID PTO RPM (engine rpm)* – 2000 @ 2556*
PTO – 13.5 HP (10.0 kW)


Dimensions with Industrial Tires
Overall Length – 101.1” (2570 mm)
Overall Width – 50.7 ” (1290 mm)
Turning Radius – 5.9 min. ft. (1.8 mts)


Tires Sizes and Options
Ag (front/rear) – n/a
Industrial (front/rear) – 20×8.0-10 / 27×12.5-15
Turf (front/rear) – 20×8.0-10 / 29×12.5-15
Battery Capacity – 12 volt, 35 amp hours
Alternator – 12 volt, 40 amps
Single plate, dry clutch
Transmission – HST with 2 ranges
Infinite Number of Gears/Speeds
Mechanical Front Wheel Drive
Hydrostatic Power Steering with 2.3 gpm pump output
Wet Disc brakes
Operating Weight – 1515 lbs.


Options
Mid-mount Mower – 52”


2216 4WD | 2216 HST
S3L Engine
Type – Four stroke, indirect injection, water-cooled, diesel
Cylinders – 3
Engine – 22 HP (16.4 kW) @ 2500 rpm
Compression Ratio – 22:1
Displacement – 68.6 cu. in. (1125 cc)


Open-center, full-live hydraulic pump with position control
Pump Output – 5.8 gpm
3-Point Linkage – Category 1, with check chains
Lift Capacity – 1400 lbs.
Rear Auxiliary Remote Valves – 1 spool optional


Trans | Live PTO
PTO RPM (engine rpm) – 540 @ 2376
MID PTO RPM (engine rpm)* – 2000 @ 2470*
PTO – 17.5 HP (13.0 kW) | 16 HP (11.9 kW)


Dimensions with Industrial Tires
Overall Length – 106.5 inches (2705 mm)
Overall Width – 53.5 inches (1359 mm)
Turning Radius – 7.2 min. ft. (2.2 mts)


Tires Sizes and Options
Ag (front/rear) – n/a
Industrial (front/rear) – 23×8.5-12 /12×16.5
Turf (front/rear) – n/a
Battery Capacity – 12 volt, 46 amp hours
Alternator – 12 volt, 50 amps
Single plate, dry clutch
Transmission – Constant mesh on gear shift and sliding mesh on range selection | HST with 2 ranges
Number of Gears/Speeds – 6 forward, 2 reverse | Infinite
Mechanical Front Wheel Drive
Hydrostatic Power Steering with 3.4 gpm pump output
Dry shoe brakes
Operating Weight – 1819 lbs. | 1973 lbs.


Options
Mid-mount Mower – 60”
Soft Cab with Canopy
Snow Blowers


2516 4WD | 2516 HST
S3L2 Engine
Type – Four stroke, indirect injection, water-cooled, diesel
Cylinders – 3
Engine – 25 HP (18.6 kW) @ 2500 rpm
Compression Ratio – 22:1
Displacement – 80.4 cu. in. (1318 cc)


Open-center, full-live hydraulic pump with position control
Pump Output – 5.8 gpm
3-Point Linkage – Category 1, with check chains
Lift Capacity – 2205 lbs.
Rear Auxiliary Remote Valves – 1 spool optional


Trans | Live PTO
PTO RPM (engine rpm) – 540 @ 2376
MID PTO RPM (engine rpm)* – 2000 @ 2526*
PTO – 21.5 HP (16.0 kW) | 20 HP (14.9 kW)


Dimensions with Industrial Tires
Overall Length – 109.3 inches (2775 mm)
Overall Width – 54.3 inches (1380 mm)
Turning Radius – 6.6 min. ft. (2.0 mts)


Tires Sizes and Options
Ag (front/rear) – n/a
Industrial (front/rear) – 23×8.5-12 /12×16.5
Turf (front/rear) – n/a
Battery Capacity – 12 volt, 35 amp hours
Alternator – 12 volt, 50 amps
Single plate, dry clutch
Transmission – Constant mesh on gear shift and synchromesh on forward reverse shuttle | HST with 2 ranges
Number of Gears/Speeds – 8 forward, 8 reverse | Infinite
Mechanical Front Wheel Drive
Hydrostatic Power Steering with 2.7 gpm pump output
Wet disc brakes
Operating Weight – 1819 lbs. | 1863 lbs.


Options
Mid-mount Mower – 60”


2816 4WD | 2816 HST
S3L2 Engine
Type – Four stroke, indirect injection, water-cooled, diesel
Cylinders – 3
Engine – 28 HP (20.8 kW) @ 2500 rpm
Compression Ratio – 22:1
Displacement – 80.4 cu. in. (1318 cc)


Open-center, full-live hydraulic pump with position control
Pump Output – 7.8 gpm
3-Point Linkage – Category 1, with check chains
Lift Capacity – 2205 lbs.
Rear Auxiliary Remote Valves – 1 spool optional


Live PTO
PTO RPM (engine rpm) – 540 @ 2376
MID PTO RPM (engine rpm)* – 2000 @ 2632*
PTO – 23 HP (17.1 kW) | 21.1 HP (15.7 kW)


Dimensions with Industrial Tires
Overall Length – 115 inches (2920 mm)
Overall Width – 59.4 inches (1509 mm)
Turning Radius – 7.9 min. ft. (2.4 mts)


Tires Sizes and Options
Ag (front/rear) – 7×16/11.2×24
Industrial (front/rear) – 27×8.5-15 /15×19.5
Turf (front/rear) – n/a
Battery Capacity – 12 volt, 46 amp hours
Alternator – 12 volt, 50 amps
Dual plate, dry clutch
Transmission – Constant mesh on gear shift and sliding mesh on range selection | HST with 3 ranges
Number of Gears/Speeds – 9 forward, 3 reverse | Infinite
Mechanical Front Wheel Drive
Hydrostatic Power Steering with 3.5 gpm pump output
Wet disc brakes
Operating Weight – 2315 lbs. | 2458 lbs.


Options
Mid-mount Mower – 72”
Soft Cab with Canopy
Snow Blowers


3316 4WD | 3316 HST
S3L3 Engine
Type – Four stroke, indirect injection, water-cooled, diesel, turbocharged
Cylinders – 3
Engine – 33 HP (24.6 kW) @ 2500 rpm
Compression Ratio – 22:5:1
Displacement – 91.3 cu. in. (1496 cc)


Open-center, full-live hydraulic pump with position control
Pump Output – 7.4 gpm
3-Point Linkage – Category 1, with check chains
Lift Capacity – 2646 lbs.
Rear Auxiliary Remote Valves – 1 spool optional


Independent | Live PTO
PTO RPM (engine rpm) – 540 @ 2376
MID PTO RPM (engine rpm)* – 2000 @ 2525*
PTO – 27 HP (20.1 kW) | 25 HP (18.6 kW)


Dimensions with Industrial Tires
Overall Length – 121.3 inches (3080 mm)
Overall Width – 59.8 inches (1520 mm)
Turning Radius – 7.9 min. ft. (2.4 mts)


Tires Sizes and Options
Ag (front/rear) – n/a
Industrial (front/rear) – 27×8.5-15 /15×19.5
Turf (front/rear) – n/a
Battery Capacity – 12 volt, 46 amp hours
Alternator – 12 volt, 55 amps
Single plate, dry clutch
Transmission – Constant mesh on gear shift and synchromesh on forward reverse shuttle | HST with 3 ranges
Number of Gears/Speeds – 8 forward, 8 reverse | Infinite
Mechanical Front Wheel Drive
Hydrostatic Power Steering with 3.4 gpm pump output
Type – Wet disc brakes
Operating Weight – 2544 lbs. | 2566 lbs.


Options
Mid-mount Mower – 72”
Snow Blowers
*Optional on 1816 HST, 2216 4WD, 2516 4WD, 2516 HST, 2816 4WD, 3316 4WD, 3316 HST